Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 230 / 418

Chapter 16 Booting and Resetting Annexes
16-10 CSMIM/Micro-CS Management Application Guide
❑
All Printer Ports
resets the parallel printer ports.
❑
All Virtual Ports
resets the virtual connections.
❑
All T1 DS1 Ports (Hard)
resets the T1 engine and terminates the
T1 Drop/Insert interface and modem sessions
.
❑
All T1DS1 Ports (Soft)
resets parameters and will disrupt service
only on DS0 channels that have been changed.
❑
All T1 DS1 ESF Counters
resets all T1 engine statistics.
❑
All Interfaces
resets the interface parameters.
❑
All Internal Modems
resets entries for internal modems only.
❑
Individual Ports
resets only the port type you enter in the option
button below the
Reset Option
box and the port numbers you enter
in the adjacent field.
❑
Individual Internal Modems
resets one or more internal modems you
enter in the option button below the
Reset Option
box and the
modem numbers you enter in the adjacent field.
❑
Dialout
resets entries used for dialing out from a Unix host to a
remote node over a port in slave mode.
❑
LAT
resets LAT (Local Area Transport) parameters. When you
use this option, existing connections keep their current values:
new parameter values apply only to LAT connections
established after you use
Reset
.
❑
Macros
resets macros after you customize them in the Annex
configuration file.
❑
Message of the Day
resets the file for the message that appears
when you establish a connection to an Annex.
❑
External Modem
s resets modem entries for external modems only.
❑
PRI Line
resets a PRI line for an ISDN Primary Rate Annex.
❑
PRI Sessions
reloads session parameter blocks in the
configuration file for an ISDN Primary Rate Annex’s session
❑
Name Server
resets the parameters and host table that control an
Annex’s ability to translate addresses to names.
❑
Security
resets security parameters.