Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 346 / 418

Chapter 19 Annex Parameters
19-46 CSMIM/Micro-CS Management Application Guide
imask_7bits
allows an Annex to mask input to seven bits. If you choose
disabled
, the
Annex expects eight-bit ASCII input.
inactivity_timer
specifies the number of minutes that a port can remain inactive. If the timer
expires, the Annex terminates all sessions and resets the port. You can
use
input_is_activity
and
output_is_activity
to define activity as input to the port
or output from the port. If you set these parameters to
disabled
, the timer
runs independent of activity. To reset a port regardless of any activity, enter
a number of minutes here, set
input_is_activity
and
output_is_activity
to
disabled
and set
port_type
to
dialin
.
inet_addr
defines the Annex’s IP address. This 32-bit address contains four 8-bit
fields separated by periods. Each field contains a number ranging from 0
to 255 or a hexadecimal number. The IP address always displays in decimal
notation.
input_buffer_size
provides the number of 256-byte blocks allocated to receive input
characters for a port.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, Basic Async Port
Type Async
Values 0 to 255 minutes
Default 0 (timer disabled)
Lists Async Port, Idle Timer, Modem, Modem Internal
Type Annex
Values For each field: 0 to 255 or hexadecimal
Default n/a
Lists Annex Only, Basic Annex
Type Async
Values 1 to 255
Default 1
Lists Async Port, Flow Control