Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 353 / 418

CSMIM/Micro-CS Management Application Guide 19-53
load_dump_sequence
specifies available network interfaces and the order in which they are used
for a down-line load or an up-line dump. You can list more than one interface
by using commas to separate interface names. You can enter:
❑
net
to specify a local area network.
❑
sl + port number
(e.g.,
sl2
) to specify a SLIP line. If you enter
sl
and
a port number, you must enter an address in the
slip_load_dump_host
parameter.
❑
self
to instruct an Annex to boot its image from the Flash ROMs.
Since the Annex cannot dump back to itself, you should include
a secondary interface here by entering
self, net
or
self,sl+port
number.
local_address
defines the IP address for the port on the Annex side of the link. This IP
address is used only when
mode
is set to
slip
,
ppp,
or
autodetect
.
location
defines a port location or description that displays at the CLI
who
command.
lock_enable
allows any port to use the LOCK DECServer command.
Type Annex
Value net, sl+ port number, self
Default net
Lists Annex Only, Basic Annex
Type Async
Values IP address
Default 0.0.0.0
Lists Async Port, PPP, SLIP
Type Async
Values 0 to 16 characters
Default “ “ (null string)
Lists Async Port, Basic Async Port
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Security