Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 368 / 418

Chapter 19 Annex Parameters
19-68 CSMIM/Micro-CS Management Application Guide
port_multisession
allows you to select ports that will display two active windows. You can use
this parameter only for ports on which the VCI command interface is
configured.
To use the multisession feature, you must:
❑
Have a valid LAT key.
❑
Enter
enabled
for the
multisession
parameter.
❑
Enter
enabled
for the
multisession_port
parameter.
❑
Reset an Annex if you change values for the
multisession parameters.
port_password
defines a port password for local password protection. You can use this
password as a back-up for host-based security if the security servers do
not respond, or as an additional line of security after you enter a user name
and password. For security reasons, Annex Manager displays this value
as
set
or
unset
.
If you use SecurID, set
port_password
to a null string (" ").
Please refer to the Annex Administrator’s Guide for UNIX
for more information about SecureID.
Type Async
Values
none, dialinautobaud, dialin, dialinoutautobaud, dialinout,
dialout, autodetect, autoadapt, ipx
Default none
Lists Async Port, Modem, Modem Internal
Type Async
Values enabled or disabled
Default disabled
Lists VCI_Interface
Type Async
Values 0 to 15 characters
Default unset
Lists Async Port, Modem, Modem Internal