Cabletron Systems CSMIM-T1 Administrator'S Manual Download

Page: 27 / 418

Installing the Annex Manager Application

CSMIM/Micro-CS Management Application Guide

1-5

11 Enter a username for the person responsible for maintaining

Annex Manager files. If you enter

root

, only root can change these

files:

The installation program will change the ownership of Annex Manager files to

root. Only owner of certain configuration files may modify those files.

To have the installation script change the ownership to another user id, enter

the username now or press return to accept root.

Enter Username [root] root

12 Enter group ids for users allowed to read and write to Annex

Manager files:

The installation program will change the group id of Annex Manager files and

directories to group 'bin'. Only members of this group can add data files.

To have the installation script change the group id, enter the group id now, or press

return to accept bin.

Enter Group id [bin] annex

13 Confirm the installation directory you entered previously:

Annex Manager 2.3 will be installed in /u1/annex_manager

If this is the correct directory press 'c' to continue or 'a' to abort the installation.

Continue or Abort (c/a) [c]

Installing Annex Manager 2.3 into '/u1/annex_manager/GUI_AM_R2.3'...

Extracting data files...

Extracting SunOS version of executable and uid...

14 List the users allowed to run Annex Manager and use the

Set

Execute Script

Copy

Boot

, and

Reset

commands:

In order for users to configure the Annex (use Set, Execute Script, Copy, Boot, and

Summary of Contents for CSMIM-T1



































































































































































































































































































































































































































Search results

Summary of Contents for CSMIM-T1

Reviews:

Related manuals for CSMIM-T1

Brands by name

Popular brands

Cabletron Systems CSMIM-T1, Administrator'S Manual

Search results

Summary of Contents for CSMIM-T1

Reviews:

Related manuals for CSMIM-T1

Brands by name

Popular brands