Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 228 / 418

Chapter 16 Booting and Resetting Annexes
16-8 CSMIM/Micro-CS Management Application Guide
If you boot an active Annex, its status in the
main window’s list changes to
NOT REACHABLE
.
In fact, although the Annex is not available
while boot processing takes place, a successful boot
does restore the Annex on your network. You can use
Verify Annex State
to restore the display.
Resetting Annex Configurations
You can use the
Reset
command to change a specific Annex or port
configuration without booting. This command lets you reset port and
interface settings, several configuration file options, and name servers. This
section explains the
Reset
command in the following sections:
❑
Displaying the Reset Window
❑
Choosing a Reset Option
❑
Resetting an Annex
Displaying the Reset Window
Displaying the Window
The
Reset
command originates in the Configure menu. To display this
window:
1 Create an Annex list in the main window.
For more information about Annex lists, see Saving and
Opening Annex Lists on page 4-13.
2 Select one or more Annexes from the list.
3 Hold the mouse button on the Configure menu, choose
Reset
and
release the mouse button.
The
Reset
window appears (see Figure 16-3).
The following example shows the
Reset
window.