Cabletron Systems CSMIM-T1, Administrator'S Manual

Page: 169 / 418

CSMIM/Micro-CS Management Application Guide 13-1
CHAPTER 13
VIEWING AND CHANGING PARAMETERS
The
Show
and
Set
commands allow you to view and change Annex
parameters. These commands appear as push buttons in the main window
and as entries in the Configure menu.
Show
and
Set
display values for the
parameters that comprise parameter groups and lists.
Show
lets you view
information;
Set
lets you view and change parameter values.
This chapter describes
Show
and
Set
in the following sections:
❑
Viewing Parameter Values
❑
Changing Parameter Values
❑
Identifying Errors
Before You Use Show and Set Commands
The
Show
and
Set
commands are based on information you enter in the main
window. Before you use
Show
or
Set
, you need to:
1 Create an Annex list and select one or more Annexes from the
list.
Show
and
Set
display information only for connected Annexes
that you select.
2 Choose a
Parameter Option
.
The appropriate group or list appears in the box.
3 Select a single parameter group or one or more individual
parameters.
Once you enter required information in the main window, you can use the
Show
and
Set
commands. For detailed information about the main window,
refer to .