Cabletron Systems CSMIM-T1 Administrator'S Manual Download

Page: 148 / 418

Chapter 9 Editing Modem Definitions

9-10

CSMIM/Micro-CS Management Application Guide

Editing the File

To edit the file:

Choose

Edit Configuration

from the Configure menu.

The configuration file appears.

Change, add, or remove modem definition information.

Save and close the file.

When you end an editing session, Annex Manager displays a
window informing you that you changed the configuration file.

Figure 9-7. Edit Configuration Window

You can select

to update the file or

to leave

it unchanged. When you complete this window Annex Manager
copies the file to its original location.

Yes

Summary of Contents for CSMIM-T1



































































































































































































































































































































































































































Search results

Summary of Contents for CSMIM-T1

Reviews:

Related manuals for CSMIM-T1

Brands by name

Popular brands

Cabletron Systems CSMIM-T1, Administrator'S Manual

Search results

Summary of Contents for CSMIM-T1

Reviews:

Related manuals for CSMIM-T1

Brands by name

Popular brands