background image

- 83 -

F3DM Owner’s Manual

If any of the following cases occur, this 
indicates a malfunction somewhere in 
the parts monitored by the indicator 
system, and please contact BYD 
authorized dealer as soon as possible. 
●  The  indicator  does  not  come  on 
when the “IG-ON” mode is enabled or 
remains on. 
● The indicator comes on while driving.

(p) Key Reminder Buzzer 
This buzzer reminds you to remove the 
key if you open the driver’s door when 
the ignition key is on “ACC” or “LOCK”. 

(q) Light Reminder Buzzer 
This buzzer reminds you to turn off the 
light if you open the driver’s door, with 
parking light or headlight on, 

Check Maintenance Indicator Lights
1. Pull up the brake parking handle. 
Braking system warning light will come 
on. 
2. Open a door.
The open door indicator comes 
on when the door does not close 
completely. 
3. Close all the doors. 
The open door indicator goes off when 
all doors closed completely.
4. When the “IG-ON” mode is enabled, 
apart from indicator for opened door, 
all the maintenance indicator lights 
come on. Several seconds later, ABS 
system fault indicator and SRS fault 
indicator go out.
If any maintenance indicator light or 
buzzer does not function as per the 
procedure above, please have the car 
checked in BYD authorized dealer as 
soon as possible.

NOTICE

If the red warning indicators (such 
as auxiliary battery charging system 
indicator, parking brake system 
indicator, low oil pressure indicator, 
high coolant temperature indicator ,Hybrid 
system warning indicator, Electric 
Power  Steering  System  Warning 
indicator, power battery failure 
indicator, electric motor failure 
indicator on the instrument panel 
come on while driving, please park 
your car immediately and check 
for fault as per instructions in this 
manual. If necessary, please contact 
BYD authorized dealer for help

使用手册小330.indd   83

2011-4-13   18:36:47

Summary of Contents for F3DM























































































































































































































Reviews: