manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 191 -

F3DM Owner’s Manual

tires in storage. 

Replace Tires

When  replacing  a  tire,  only  use 
replacement tires and wheels that are 
of the same size, load index, speed 
rating and type as those originally by 
BYD.
U s e   o f   a n y   t i r e   o r   w h e e l   n o t 
recommended by BYD can affect 
the safety and performance of your 
vehicle, such as operability, passenger 
comfort, calibration of speedometer 
and odometer, ground clearance 
between the car body and tire or tire 
chains. 

WARNING

Please follow the instructions below, 
or an accident may occur resulting 
in serious injuries. 

 

y

Do not mix radial, bias belted, 

or bias-ply tires on your vehicle, 
as this may cause dangerous 
handling characteristics resulting 
in loss of control. 

 

y

Only use tires with size 

recommended by manufacturer’s ,or 
it may cause dangerous handling 
characteristics resulting in loss of 
control.

Never replace the tire on BYD F3DM 
with an used tire. 
Unknown tire may cause great danger.
You are recommended to replace four 
tires at one time, or at least both front 

or rear tires at the same time. 
See “If you have a flat tire” in Chapter 
4 for change procedure. 
Keep the wheels in balance when 
replacing tires. 
An unbalanced wheel may affect 
vehicle handling and tire life. Wheels 
can get out of balance with regular 
use and should therefore be balanced 
occasionally.

Tire Rotation

!

使用手册小330.indd   191

2011-4-13   18:36:56

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Cadillac 2011 CTS COUPE Personalization Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 20
Cadillac 2011 CTS COUPE Specifications preview
2011 CTS COUPE
Brand: Cadillac Pages: 2
Cadillac 2009 CTS Owner'S Manual preview
2009 CTS
Brand: Cadillac Pages: 494
Cadillac 2008 Escalade Owner'S Manual preview
2008 Escalade
Brand: Cadillac Pages: 500
Cadillac 2006 Escalade Warranty And Owner Assistance Information preview
2006 Escalade
Brand: Cadillac Pages: 40
Cadillac 2004 DeVille Owner'S Manual preview
2004 DeVille
Brand: Cadillac Pages: 432
Cadillac 1997 Catera Owner'S Manual preview
1997 Catera
Brand: Cadillac Pages: 338
Cadillac 2009 STS Get To Know preview
2009 STS
Brand: Cadillac Pages: 20
Cadillac 2005 STS Owner'S Manual preview
2005 STS
Brand: Cadillac Pages: 438
Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Brand: Eaton Pages: 65
Jabra SP200 - QUICKSTART GUIDE 1 Quick Start Manual preview
SP200 - QUICKSTART GUIDE 1
Brand: Jabra Pages: 2
Jabra BT150 - Headset - Over-the-ear Quick Start Manual preview
BT150 - Headset - Over-the-ear
Brand: Jabra Pages: 2
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Parrot Parrot MKi + ParrotCK3100 range LOGAN Installation Manual preview
Parrot MKi + ParrotCK3100 range LOGAN
Brand: Parrot Pages: 10
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2

Brands by name

Popular brands

Load more brands