manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 201 -

F3DM Owner’s Manual

WARNING

 

y

Make sure the key is turned to 

LOCK before replacing the fuse.

 

y

Never  use  a  fuse  with  higher 

amperage rating, or any other 
object to replace a fuse. This 
may cause serious damage and 
possibly a fire.

Add Washer Fluid

If the washer does not work, the 

washer tank may be empty. Check the 
washer level on the content gauge. If 
the washer level is below “LOW” mark, 
you shall refill the washer.

Before Adding Washer
Pull out Washer funnel and hang it on 
the brake of front engine hood support. 
You may use plain water as washer 
fluid. However, in cold areas where 
temperatures range below freezing 
point, you have to use washer fluid 
containing antifreeze. This product 
is available at your BYD authorized 

dealer and most auto parts stores. 
Follow the manufacturer’s directions 
for how much to mix with water. 
Make sure to put back the funnel in 
place after filling the washer tank.

NOTICE

Don’t use engine antifreeze or any 
other substitutes for it will damage 
the vehicle paint.

Replace Bulb

The following illustrations show how 
to take off the bulbs. When replacing 
a bulb, make sure the ignition switch 
and light switch are off. Use bulbs with 
the wattage ratings given in the table 
below.  
Parking light and rear parking light 
consists of a group of luminous 
diodes.  When  the  number  of  burnt 

!

使用手册小330.indd   201

2011-4-13   18:36:56

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
Axxess AX-AM-AU92 Installation Instructions Manual preview
AX-AM-AU92
Brand: Axxess Pages: 8
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
Toyota CAMRY HV Manual preview
CAMRY HV
Brand: Toyota Pages: 636
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Toro Security Cage Kit Installation Instructions Manual preview
Security Cage Kit
Brand: Toro Pages: 8
Grillo PK 1400 Operator'S Manual preview
PK 1400
Brand: Grillo Pages: 71
Maserati MC 20 2022 Roadside Assistance Manual preview
MC 20 2022
Brand: Maserati Pages: 37
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
Hamron 012463 Operating Instructions Manual preview
012463
Brand: Hamron Pages: 6

Brands by name

Popular brands

Load more brands