BYD F3DM, Owner'S Manual

Page: 40 / 214

- 40 -
F3DM Owner’s Manual
for getting into the car will be cancelled
automatically.
● 30-Second Time Delay for Getting
into the Car
When all the car doors are unlocked
by remote control, the rear interior light
and ignition key warning light (optional)
will be on about 30 seconds. It is the
default selected function of the system.
To select this function, be sure to
cancel 15-second time delay for getting
into the car. If both 15-second and
30-second time delay are selected,
the system will select 15-second time
delay automatically.
Steps for Changing Optional Functions
1. Check if anti-theft function is
disabled.
2. Close all the doors.
3. Insert the key into ignition switch.
4. Repeat opening and closing the
driver-side door twice within 10
seconds. (Close → Open → Close →
Open → Close).
5. Repeat to turn the ignition switch
from “ACC” to “ON” three times.
(ACC→ON→ACC→ON→ACC→
ON→ACC)
Then, anti-theft indicator is on.
6. Refer to the table below, press
LOCK button on the remote control
and make sure the indicator flashes.
You can press LOCK button to search
whether the door is open or closed.
When this function is selected, the turn
signal lights flash once with a buzzing
sound; to disable it, just open any door
and close it; if the turn signal lights
flashes twice with two buzzing sounds,
it indicates this function is disabled. If
unsuccess, open the door again and
then close it. Change cancelled status
to set status.
Times for
pressing
LOCK
button
Selected Functions
One Auto setting functions
Two
Door auto lock and
unlock
Three Lighting system
Four Enable alarm of 6 cycles
Five Enable alarm of 9 cycles
Six
15-second time delay for
getting into the car
Seven
30-second time delay for
getting into the car
Eight
Vibration sensitivity
settings (optional)
7. You can complete function setting by
doing any items below.
● Turn the ignition switch to “ON”.
● Close the driver-side door for over
使用手册小330.indd 40 2011-4-13 18:36:42