manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 125 -

F3DM Owner’s Manual

level roads, please contact Your BYD 
authorized service provider.
But it’s normal to hear slight knocking 
for a short time when the car is 
accelerating or driving on an uphill 
road, please don’t worry.

Fuel Tank Capacity
38L

Fuel shut-off System

The fuel shut–off system stops 
supplying fuel to the engine to minimize 
the risk of fuel leakage when the 
engine stalls upon accident. To restart 
the DM system after the fuel shut–off 
system activates, press the ignition 
switch to “ACC” or “LOCK”, and start it.

NOTICE

Inspect the ground under the car 
before restarting the DM system. 
If you found that liquid has leaked 
onto the ground, the fuel system has 
been damaged and needed repair. 
In this case, please contact BYD 
authorized service provider and do 
not repair it by yourself.

Three-Way Catalytic 

Converter

The three-way catalytic converter is 
an emission control device installed in 
the exhaust system, in order to reduce 
pollutants in exhaust gas.

NOTICE

 

y

When the engine is running, keep 

people and combustible materials 
away from the exhaust pipe. The 
exhaust gas is very hot.

 

y

DO not drive, park or idle your 

car on ground over anything 
that burn easily such as grass, 
leaves, paper.  

使用手册小330.indd   125

2011-4-13   18:36:50

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
GMC YUKON 2018 Owner'S Manual preview
YUKON 2018
Brand: GMC Pages: 425
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
TATA Motors 2013 Nano Owner'S Manual preview
2013 Nano
Brand: TATA Motors Pages: 136
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Safe Fleet PRIME DESIGN HXR-269-E-UM3-80 Manual preview
PRIME DESIGN HXR-269-E-UM3-80
Brand: Safe Fleet Pages: 12
JSPORT JSRLP024 Installation Instructions preview
JSRLP024
Brand: JSPORT Pages: 2
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4

Brands by name

Popular brands

Load more brands