BYD F3DM, Owner'S Manual

Page: 39 / 214

- 39 -
F3DM Owner’s Manual
repetition can be changed. For details,
please refer to “Settings of Optional
Functions”.
Reset Anti-theft System
If anti-theft system is not under the
status above, alarm will stop after
the repetition ends. After alarm
stops, the anti-theft system will be
set automatically if the Auto Setting
Functions is selected.
Stop Alarming
When the anti-theft alarm sounds, you
can press LOCK button to stop it, but
the anti-theft function is still enabled.
When anti-theft alarm sounds, you
can press the UNLOCK button to stop
it and the anti-theft function will be
disabled.
Settings of Optional Functions
Optional Anti-theft Functions
● Automatic Setting Functions
For details, please refer to “Steps for
Changing Optional Functions”.
● Auto Lock and Unlock
For details, please refer to “Steps for
Changing Optional Functions”.
● Lighting System on the Car
For details, please refer “Rear Interior
lights” and “Ignition Key Warning Lights
(optional)” in this Chapter.
● Enable Alarm of Six Cycles
When anti-theft alarm is enabled, the
alarm sounds and turn signal lights
flash for about 30 seconds and then
stop for about 15 seconds, which is
regarded as a cycle. Default of auto
setting is to enable alarm of three
cycles, yet which can be changed to
six cycles.
After the alarm of six cycles is set, alarm of three cycles and nine cycles
will be disabled automatically. When
the alarms of 6 and 9 cycles are
disabled, it will be restored to the
default “alarm of 3 cycles”.
● Enable Alarm of Nine Cycles
Similarly, you can select to change
it into alarm of 9 cycles. When this
function is selected, the default to
enable alarm of three cycles and six
cycles will be disabled automatically.
When the alarms of 6 and 9 cycles
are disabled, it will be restored to the
default setting “alarm of 3 cycles”.
● 15-Second Time Delay for Getting
into the Car
When all the car doors are unlocked
by remote control, the rear interior light
and ignition key warning light (optional)
will be on about 15 seconds (default:
30 seconds). When this function is
selected, about-30-second time delay
使用手册小330.indd 39 2011-4-13 18:36:42