manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 82 -

F3DM Owner’s Manual

(l)  Electric  Power  Steering  System 
Warning Indicator
This indicator will come on when 
the  “IG-ON”  mode  is  enabled.  If 
EPS  system  is  working  normally, 
the indicator will go off after several 
seconds. Later if there is a fault in the 
system, this indicator will come on 
again. 
If any of the following cases occurs, 
this indicates a malfunction somewhere 
in the parts monitored by the indicator 
system and please contact BYD 
authorized dealer as soon as possible.
●  The  indicator  does  not  come  on 
when the “IG-ON” mode is enabled or 
remains on. 
● This indicator comes on while driving.

CAUTION

If any of the following cases 
o c c u r s ,   i m m e d i a t e l y   s t o p 
your vehicle and contact BYD 
authorized dealer immediately. 
In this case, swerve would be 
very inflexible. You should hold 
the steering wheel firmly while 
driving.

 

y

The indicator does not come 

on  when  the  “IG-ON”  mode  is 
enabled or remains on. 
In  this  case,  EPS  system  may 
not work normally, so please park 
your car in a safe place. 

 

y

This indicator comes on while 

driving. 

(m) Low Power Indicator
The indicator comes on when the 
power is low, warning that driver shall 
lower the car speed and charge the 
battery immediately after parking. 

(n) Power Battery Failure Indicator
T h i s   i n d i c a t o r   c o m e s   o n   w h e n 
something was wrong.
If any of the following cases occur, this 
indicates a malfunction somewhere in 
the parts monitored by the indicator 
system and please contact BYD 
authorized dealer as soon as possible. 
● The indicator remains on when the 
“IG-ON” mode is enabled.
● The indicator comes on while driving.

(o) Electric Motor Failure Indicator
The indicator comes on when there is 
a failure in electric motor system. 

!

使用手册小330.indd   82

2011-4-13   18:36:47

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
CITROEN PICASSO XSARA DESIRE 1.6 - MESUREMENT Manual preview
PICASSO XSARA DESIRE 1.6 - MESUREMENT
Brand: CITROEN Pages: 2
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
TATA Motors Indigo MANZA QUADRAJET 90 Owner'S Manual & Service Book preview
Indigo MANZA QUADRAJET 90
Brand: TATA Motors Pages: 10
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
Monacor Carpower CAP-20 Quick Manual preview
Carpower CAP-20
Brand: Monacor Pages: 2
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Ecco EC4210B-K Installation And Operation Instructions Manual preview
EC4210B-K
Brand: Ecco Pages: 9
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
Oldsmobile 1994 88 Owner'S Manual preview
1994 88
Brand: Oldsmobile Pages: 276
Volkswagen PASSAT CC - Brochure preview
PASSAT CC -
Brand: Volkswagen Pages: 32
Xforce PR-104 User Manual preview
PR-104
Brand: Xforce Pages: 11

Brands by name

Popular brands

Load more brands