manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 197 -

F3DM Owner’s Manual

of magnesia, beaten raw egg 
o r   v e g e t a b l e   o i l .  T h e n   g o 
immediately for emergency help.

Check Auxiliary Battery Appearance

Electrode contact

Battery-pressing 
board

Earth wire

Check whether the battery and its 
terminal is corroded, loose, cracked or 
has loose hold-down clamp.
a. If the battery is corroded, wash it 
off with a solution of warm water and 
baking soda. Coat the outside of the 

terminals with grease to prevent further 
corrosion.
b. If terminal is loose, tighten its clamp 
nuts; but do not overtighten.
c. Tighten the hold–down clamp only 
enough to keep the battery firmly in 
place. Overtightening may damage the 
battery case.

NOTICE

 

y

Make sure the power system and 

all accessories are cut off before 
performing maintenance. 

 

y

When  checking  the  battery, 

remove the ground cable from 
the negative terminal (“–” mark) 
first and reinstall it last.

 

y

Do not cause short circuit when 

using tools.

 

y

Make sure no solution gets into 

the battery when washing it.

Check the Internal Status of Battery
Check the internal status of the battery 
according to instructions on the outer 
shell and status indicators of the 
battery.

NOTICE

 

y

Charging the battery without 

disconnecting the wires may 
cause serious damage on ECU 
and other electrical devices on 
the vehicle.  Remove the battery 
wires first before connecting the 
battery to charger.

 

y

When the engine is not running, 

use electrical devices for a long 
time may cause over discharge 
of the battery, which may lead to 
difficulty to start the car or even 
permanent damage to the battery. 

使用手册小330.indd   197

2011-4-13   18:36:56

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

APEXi V-AFC II Instruction Manual preview
V-AFC II
Brand: APEXi Pages: 18
Prorack K519 Fitting Instructions For Basic Carrier preview
K519
Brand: Prorack Pages: 15
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
ACV 281178-28G-M Installation Manual preview
281178-28G-M
Brand: ACV Pages: 2
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Ferve F-2024 Operating Instructions Manual preview
F-2024
Brand: Ferve Pages: 28
Volkswagen 1963 1500 Instruction Manual preview
1963 1500
Brand: Volkswagen Pages: 68
Bulldog Security BulldogOne BD1 User Manual preview
BulldogOne BD1
Brand: Bulldog Security Pages: 7
Dodge 2004 JR41 Stratus Sedan Owner'S Manual preview
2004 JR41 Stratus Sedan
Brand: Dodge Pages: 273
Toyota 1998 Celica Owner'S Manual preview
1998 Celica
Brand: Toyota Pages: 204
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
PowerMadd Tri-Mount 34269 Mounting Tips preview
Tri-Mount 34269
Brand: PowerMadd Pages: 2

Brands by name

Popular brands

Load more brands