BYD F3DM, Owner'S Manual

Page: 37 / 214

- 37 -
F3DM Owner’s Manual
Anti-theft system
Under anti-theft status, the system
will raise the alarm if the following
conditions are detected.
y
Any car door is unlocked.
y
The ignition switch is turned to “ON”.
y
Reconnect the battery or anti-theft
controller after disconnecting.
y
Insert the ignition key.
If someone tries to damage you car
or break in, the system will sound the
alarm and the turn signal lights flash.
Manual Setting Functions
Set the anti-theft system manually with
remote control.
Press LOCK button on the remote
control to enable anti-theft function,
then the turn signal lights flash once
and all the doors will be locked.
About 1 second later, anti-theft function
is enabled, and then anti-theft warning
light (dashed part in the picture) begins
to flash slowly.
If any door is unlocked, press LOCK
button, then the alarm sound a long
tone and the vehicle can not enter anti-
theft function; please follow the steps
below:
y
Close all the doors
y
Reset the anti-theft system.
Automatic Setting Functions
It is optional. You need to change the
使用手册小330.indd 37 2011-4-13 18:36:42