manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 7 -

F3DM Owner’s Manual

The tire blowout or mechanical failure 
may cause extremely accident. To 
reduce the possibility of such problems, 
check your tire pressure and condition 
frequently, and perform all regularly 
scheduled maintenance.

WARNING

 

y

There are some parts that reach 

high temperatures while you drive, 
do not touch those components 
(such as engine) to avoid injury.

 

y

Medical devices (such as cardiac 

pacemaker) may be interfered by 
radio wave, so please consult your 
doctor before you driving your 
BYD F3DM. 

NOTICE

 

y

When charging, please park your 

vehicle in well ventilated places. 

 

y

Power battery is installed on your 

vehicle, so please do not drive it 
throughout deep water. 

NOTICE

 

y

Because your BYD F3DM is a 

hybrid vehicle, which is not used 
widely, for you enjoy the after-sale 
and repair properly, do not drive 
your F3DM far away from the sale 
service areas.

 

y

Because the structure of the hybrid 

vehicle is more complex, so it may 
take a longer time to repair your 
F3DM, please be more patient.

 

y

To keep your F3DM in a good 

p e r f o r m a n c e ,   p l e a s e   d r i v e 
your vehicle in the condition 
which temperature is above 
-10

℃(

14

 ℉

)

WARNING

The battery of BYD F3DM is placed 
under the guard board of trunk; if 
the battery needs to be replaced, 
please contact your BYD authorized 
dealer, do not replace the battery by 
yourself, it may cause injury to you.

NOTICE

Battery posts, terminals and related 
accessories of your F3DM may 
contain lead and lead compounds. In 
order to reduce the harm to you, do 
wash your hands after handling.

!

!

使用手册小330.indd   7

2011-4-13   18:36:38

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Yakima K1188 Instructions Manual preview
K1188
Brand: Yakima Pages: 12
JEHNERT SOUND DESIGN 65400 Assembly Instruction Manual preview
65400
Brand: JEHNERT SOUND DESIGN Pages: 8
Rainbow Experience Series Installation Manual preview
Experience Series
Brand: Rainbow Pages: 19
Yakima K1006 Instructions Manual preview
K1006
Brand: Yakima Pages: 12
Conrad 75 16 30 Operating Instructions Manual preview
75 16 30
Brand: Conrad Pages: 26
Ford 2003 Thunderbird Owner'S Manual preview
2003 Thunderbird
Brand: Ford Pages: 200
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
v.LOGiC V5-CIC-E-PNP Manual preview
V5-CIC-E-PNP
Brand: v.LOGiC Pages: 22
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Phonocar VM 320 Instruction Manual preview
VM 320
Brand: Phonocar Pages: 28

Brands by name

Popular brands

Load more brands