manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 149 -

F3DM Owner’s Manual

in the jack point. Raising the 
vehicle with jack improperly 
positioned will damage the 
vehicle or may allow the vehicle 
to fall off the jack and cause  
personal injury.

 

y

When  the  car  is  supported  by 

jack, no one is allowed to get 
under the car.

 

y

Use jack only for lifting the car 

while tire changing.

 

y

Do not lift up the car when 

someone is in it. 

 

y

Do not put anything at the top or 

bottom of the jack while lifting the 
car. 

 

y

Just lift the car to a height 

that allows tire removal and 
replacement.

WARNING

 

y

Do not continue driving the car 

with a flat tire. Driving even a 
short distance on a deflated 
tire can lead to tire failure, also 
reduce fuel efficiency and tire 
life, and may affect the vehicle’s 
handling and stopping ability.

 

y

Use the spare tire  as a temporary 

replacement  only.  Get  your 
regular tire repaired or replaced, 
and put on your vehicle as soon 
as you can.

Tools Required and Spare Tire

1. Take  out  tools  required  and  the 
spare tire.
1.Toolkit
2.Jack
3.Spare tire
In emergency conditions, you may 
have to repair the car by yourself. 
Please well know the use method and 
storage location of the jack and various 
tools.

!

使用手册小330.indd   149

2011-4-13   18:36:52

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

RAM CHASSIS CAB 3500 2017 Quick Reference Manual preview
CHASSIS CAB 3500 2017
Brand: RAM Pages: 16
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
Vauxhall Meriva 2014 Infotainment Manual preview
Meriva 2014
Brand: Vauxhall Pages: 131
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
Safe Fleet PRIME DESIGN HXR-269-E-UM3-80 Manual preview
PRIME DESIGN HXR-269-E-UM3-80
Brand: Safe Fleet Pages: 12
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Lippert Stargazer Spirit XTR Skylight Installation Manual preview
Stargazer Spirit XTR Skylight
Brand: Lippert Pages: 8
Scosche HAQ02 Quick Start Manual preview
HAQ02
Brand: Scosche Pages: 8
FVC Sprinter Bed System DIY Installation Manual preview
Sprinter Bed System DIY
Brand: FVC Pages: 8
Brainz 38508 Instruction Manual preview
38508
Brand: Brainz Pages: 2
Reese 50085 Installation Instructions Manual preview
50085
Brand: Reese Pages: 21
Porsche 92854 Owner'S Manual preview
92854
Brand: Porsche Pages: 145
Honda 08P00-T7S-600 Installation Instructions preview
08P00-T7S-600
Brand: Honda Pages: 5
Audi S4 Biturbo Buyer'S Manual preview
S4 Biturbo
Brand: Audi Pages: 9
Metra Electronics 95-7322 Installation Instructions Manual preview
95-7322
Brand: Metra Electronics Pages: 16

Brands by name

Popular brands

Load more brands