manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 119 -

F3DM Owner’s Manual

Cigar Lighter and Front Ashtray

Cigar Lighter and Rear Ashtray
Cigar Lighter 
To use cigar lighter, just press it in. 
After it is lighted up, it will popup 
automatically for use. 
When using cigar lighter, make sure 
the key is on “ACC” or “ON”.

NOTICE

Do not press the cigar lighter 
without releasing it.

Ashtray 
Use: To use the ashtray, pull it out. 
After using the ashtray, push it back to 
the original position completely. 
Front: to remove the ashtray, just press 
the locking spring strip and pull it out. 
Rear: to remove the ashtray, just clamp 
both sides of ashtray and then pull it 
out.

WARNING

To reduce the possibility of human 
injury in case of accident or hard 
braking, close the ashtray after 
using
To prevent fire, please quench the 
cigarettes and matches before put 
them into the ashtray, and ensure 
the ashtray is fully closed.
To prevent fire, do not put  paper or 
other inflammable substances into 
the ashtray.

!

使用手册小330.indd   119

2011-4-13   18:36:50

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Mercedes-Benz 2013 C-Class Coupe Owner'S Manual preview
2013 C-Class Coupe
Brand: Mercedes-Benz Pages: 388
Standby L54 Manual preview
L54
Brand: Standby Pages: 10
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2
AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16

Brands by name

Popular brands

Load more brands