manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 55 -

F3DM Owner’s Manual

WARNING

If any of the following 

co

nditions, airbag system may 

have Malfunction troubles:  

 

y

The indicator is not on when 

turning on the ignition switch.

 

y

Turn on the ignition switch, and 5 

seconds later, the warning light 
remains on or it flashes and goes 
on again after going out. 

 

y

The indicator is on after turning 

off the ignition switch.

 

y

The indicator comes on or flashes 

while driving.

WARNING

If any SRS trouble indicated by 
warning light, please contact your 
BYD authorized dealer for inspection 
as soon as possible. Otherwise, the 
airbag system can not work properly 
in case of accident

SRS Airbag Triggering Conditions
The airbag is triggered under the 
following conditions: severe frontal 
crashes and some special crashes.
In case of minor front collision, side 
collision, but it won’t be triggered by 
rear collision or roll-over, airbag system 
generally won’t be triggered.. In such 
accidents, fastening the seat belt, can 
protect the driver and passenger in the 
normal way.
The decisive factor for triggering SRS 

is the result of judgment through 
comprehensive intelligent comparison 
of the deceleration curve, which is 
produced in a collision and acquired by 
the electronic control unit (ECU), with 
the set value. If the signals, such as 
deceleration, produced and detected 
in the collision is lower than the set 
reference value in the ECU, the airbag 
won’t be triggered even though the car 
may have been severely deformed in 
the accident.
BYD SRS ECU on setting has taken 
various common misuse and domestic 
road conditions into full consideration. 
However, as causes and conditions 
of crashes are widely variable, for the 
sake of your safety, please strictly 
abide by this manual to use the vehicle 
correctly and avoid misuse; otherwise, 
the airbag may be incapacity.

!

!

使用手册小330.indd   55

2011-4-13   18:36:44

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Brand: Raptor Series Pages: 6
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
POOL-LINE 110050 Assembly Instructions preview
110050
Brand: POOL-LINE Pages: 2
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
CITROEN CX 2000 Repair Manual preview
CX 2000
Brand: CITROEN Pages: 394
TATA Motors Indigo Marina Owner'S Manual & Service Book preview
Indigo Marina
Brand: TATA Motors Pages: 146
Curt Group Aries 2074113 Installation Manual preview
Aries 2074113
Brand: Curt Group Pages: 2
Fiat FIORINO Owner'S Handbook Manual preview
FIORINO
Brand: Fiat Pages: 220
Bazooka UT6200 Troubleshooting Manual preview
UT6200
Brand: Bazooka Pages: 2
Chevrolet CORVETTE 2020 Owner'S Manual preview
CORVETTE 2020
Brand: Chevrolet Pages: 324

Brands by name

Popular brands

Load more brands