manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 144 -

F3DM Owner’s Manual

highways. The faster you drive, the 
greater fuel consumption. By reducing 
your speed, you can cut down on fuel 
consumption. 
●Keep  the  Front  Wheels  in  Proper 
Alignment. Improper alignment not 
only cause faster tire wear, but also put 
extra load on the engine, which in turn 
waste fuel.
●To  increase  driving  comfort  and 
safety, avoid hitting the curbstone and 
slow down on rough roads. 
●Keep the chassis clean and free of 
mud etc. It helps lessen the vehicle 
weight and prevent corrosion. 
●Adjust  and  Keep  Vehicle  at  Best 
Performance. A dirty air cleaner, 
improper valve clearance, dirty 
plugs, dirty oil and grease, brakes 
not adjusted etc. all lower engine 
performance contribute to poor fuel 
economy. For longer life of all parts 

and lower operation costs, keep 
all maintenance work on schedule, 
and if you often drive under severe 
conditions, see that your vehicle 
receives more frequent maintenance.
(Refer to Chapter 6)

WARNING

If you do not use the vehicle for a 
long time (2 weeks or more), the 
power battery and auxiliary battery 
will discharge and their power will 
decrease. Therefore, in order to 
make up for the discharging, you 
can take either of the following 
methods to charge the batteries 
once every two weeks:
1.using charge device 
2. Starting the DM system for 
about 30 minutes with all electrical 
components turned off.

!

使用手册小330.indd   144

2011-4-13   18:36:52

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Brodit ProClip 833995 Manual preview
ProClip 833995
Brand: Brodit Pages: 2
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
MiX Telematics FM 3617i Installation Manual preview
FM 3617i
Brand: MiX Telematics Pages: 39
Airstream 2008 Safari Owner'S Manual preview
2008 Safari
Brand: Airstream Pages: 103
Wallbox PLP1 Installation Manual preview
PLP1
Brand: Wallbox Pages: 21

Brands by name

Popular brands

Load more brands