manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 52 -

F3DM Owner’s Manual

WARNING

 

y

Always make sure the shoulder 

belt is positioned across the 
center of your shoulder. The belt 
should be kept away from your 
neck and not cross your arm 
instead of your shoulder. Failure 
to do so could reduce the amount 
of protection in an accident 
and cause serious injuries in a 
collision.

2-point Seat Belt

Draw out

Adjust the seat as needed and sit up 
straight and well back in the seat. To 
fasten your belt, pull it out from the 
retractor and insert the tab into the 
buckle.

To release the belt, press the buckle 
release button and allow the belt to 
retract.
If the belt does not retract smoothly, 
pull it out and check for kinks or twists. 
Then make sure it remains untwisted 
as it retracts.

SRS driver and front 

passenger airbags

The  SRS  (Supplemental  Restraint 
System) front airbags provide further 
protection for the driver
and front passenger in addition to the 
primary safety protection provided by 
the seat belts.
In response to a severe frontal 
impact,the SRS front airbags work 
together with the seat belts to reduce 

!

使用手册小330.indd   52

2011-4-13   18:36:43

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
Uebler F42 Mounting And Operating Instructions preview
F42
Brand: Uebler Pages: 18
Jackco SHARP ALIGN User Manual preview
SHARP ALIGN
Brand: Jackco Pages: 11
Edelbrock 6883 Instructions preview
6883
Brand: Edelbrock Pages: 2
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
EUFAB 16458 Operating Instructions Manual preview
16458
Brand: EUFAB Pages: 16
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295
Blaupunkt 7 608 502 000 Installation Instructions Manual preview
7 608 502 000
Brand: Blaupunkt Pages: 6
Mitsubishi Outlander Plug-in hybrid Quick Manual preview
Outlander Plug-in hybrid
Brand: Mitsubishi Pages: 28
EUFAB 16559 Operating Instructions Manual preview
16559
Brand: EUFAB Pages: 12
Westfalia 17 56 46 Instruction Manual preview
17 56 46
Brand: Westfalia Pages: 2
Edelbrock 3824 Installation Instructions preview
3824
Brand: Edelbrock Pages: 2
SkyRack SR-CB-101 Assembly And Instruction Sheet preview
SR-CB-101
Brand: SkyRack Pages: 2

Brands by name

Popular brands

Load more brands