manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 156 -

F3DM Owner’s Manual

Emergency Towing

For emergency towing, we recommend 
you to have it done by    your BYD 
authorized dealer. 
If you cannot find a towing company 
under emergency situation, please 
tie the towing cable or chain to the 
emergency towing hook at the bottom 
of the car for temporary towing. In this 
case, you shall be extremely careful.

WARNING 

 

y

Please use the specified towing 

hook, cable or chain and tie the 
cable or chain to the hook tightly, 
or it may damage the car and 
cause serious injury or death.

 

y

Do not tow the car from the 

rear with all four wheels on 
the ground, or it will seriously 
damage the transmission.

 

y

You  are  required  to  release  P 

gear before towing the car, that’s 
to say, when the engine starts, 
you shall shift transaxle to N gear 
before driving. If P gear is locked, 
you can only tow the car by lifting 
the front wheels off the ground, or 
it may damage the transmission 
box. 

 

y

Do not tow the car farther than  

10km and keep the speed below 
30  KM/h. 

 

y

The DM system shall be running 

in towing; if not, boosters of 
brake and steering device cannot 
work, which makes steering and 
braking much harder than usual.

The driver must be in the vehicle to 
steer the car and control the brake.
Towing in this way may be done only 
on hard–surfaced roads for a short 
distance and at low speeds. Also the 
wheels, axles, transmission, drive train, 
steering, and brakes must be in good 
condition.

!

使用手册小330.indd   156

2011-4-13   18:36:53

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Brand: Yakima Pages: 15
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
Spiral Audio KT-FI001PB Nstallation Instructions preview
KT-FI001PB
Brand: Spiral Audio Pages: 2
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
A-Tach 50092 Quick Start Manual preview
50092
Brand: A-Tach Pages: 2
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
rockymounts SplitRailLS Installation Instructions Manual preview
SplitRailLS
Brand: rockymounts Pages: 6
DEFA MultiCharger 1204 User'S Installation Manual preview
MultiCharger 1204
Brand: DEFA Pages: 28
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
Acura 2011 RDX Navigation System Advanced Technology Manual preview
2011 RDX Navigation System
Brand: Acura Pages: 16
ULTIMATE SPEED 1188 1525 Instructions For Use And Safety Manuallines preview
1188 1525
Brand: ULTIMATE SPEED Pages: 26
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43

Brands by name

Popular brands

Load more brands