BYD F3DM Owner'S Manual Download Page 130 | Manualshive

Page: 130 / 214

background image

- 130 -

F3DM Owner’s Manual

Electronic Power Steering

System

The electronic power steering system,
which offers steering power by electric
engine in steering, can help the driver
to control the steering wheel easily and
accurately. When the key is turned to
“ON”, warning light for power steering
system turns on and the system starts
to self-inspect. After 3 seconds, the
warning light for power steering system
will turn off if there is no fault in the
system; if not, the light will not turn off.
After self-inspection, if there is any
trouble while driving, the warning light
will also turn on.
In the following conditions, you may
feel it’s difficult to operate the steering
wheel while the warning light for power
steering system does not turn on
(Because it is not a malfunction)

In case of frequently manipulating or
fully turning the steering wheel for a
long time, the power steering effect
may be limited to avoid overhea. In
this situation, you should stop turning
the steering wheel or park your car
and turn the switch to “ACC” or “OFF”.
It takes about 10 minutes to for the
system to restore power.

NOTICE

y

When the auxiliary battery

power is low, you may feel the
steering becomes heavy. It is a
malfunction, please contact BYD
authorized service provider for a
check.

y

When turning the steering wheel,

you may hear electric engine
noise, made by steering electric
engine. It is not a malfunction.

WARNING

If any of the following conditions
about power steering system
warning light, it indicates the
power steering system may have
a malfunction. Please contact your
BYD authorized service provider for
a check as soon as possible:
1. When turning the ignition switch
to “ON”, the light does not turn on or
is always on.
2. The indicator light is always on
while driving.
In this case, it is much more difficult
to turn the steering wheel and you
should hold the steering wheel firmly
and drive slowly.

!

使用手册小330.indd 130

2011-4-13 18:36:51

«
...
128
129
130
131
132
...
»

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Brand: Camcar Pages: 6

Brand: EAL Pages: 4

Brand: Vauxhall Pages: 177

Brand: IAG Pages: 3

Brand: 3SIXT Pages: 12

Camaro 12000 1968 Series

Brand: Chevrolet Pages: 455

AAB-P-RZR900-K2-001

Brand: SuperATV Pages: 3

Brand: Audi Pages: 9

Brand: Belkin Pages: 4

FIX&GO automatic

Brand: Alfa Romeo Pages: 40

Challenger 2013

Brand: Dodge Pages: 543

OCTAVIA - TECHNICAL CHANGES 11-2009

Brand: Skoda Pages: 16

Sedan CIVIC 2022

Brand: Honda Pages: 701

Brand: Mitsubishi Pages: 19

Brand: Camecho Pages: 2

E60-82-007-02-10

Brand: Eibach Pages: 3

Brand: Mopar Pages: 17

Brand: Reliant Pages: 206

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands