manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 128 -

F3DM Owner’s Manual

chamber together with the intake 
air and participates in combustion. 
High  temperature  exhaust  gas  may 
also combust the engine oil used to 
lubricate the exhaust valve stems.
Consumption of engine oil depends 
on its viscosity and quality and actual 
vehicle conditions. 
High  speed  driving  and  frequent 
acceleration/deceleration at HEV mode 
will increase the consumption of engine 
oil. 
A new engine may consume more 
engine oil as its pistons, piston rings 
and cylinder walls have not become 
conditioned.

Consumption of Engine Oil 
Please be noted that the oil may 
become diluted and make it difficult to 
judge the true level accurately.
.  

For example, if a vehicle is used for 
repeated short trips, and consumes 
a normal amount of oil, the dipstick 
may not show any drop in the oil level 
at all, even after 1000 km or more. 
This is because the oil is gradually 
becoming diluted with fuel or moisture, 
making it appears that the oil level has 
not changed. The diluting ingredients 
evaporate out when the vehicle is 
then driven at high speeds, as on an 
expressway, making it appear that oil 
is excessively consumed after driving 
at high speeds.

Significance of Checking Engine Oil 
Level
One of the key points of vehicle 
maintenance is to keep the engine oil 
at optimum level, so that oil function 
will not be impaired. In one word, it is 
important to check the engine oil level 

regularly.  BYD recommend that the 
engine oil level should be checked 
every time you refuel the car.

NOTICE

Failure to check oil level regularly 
could result in serious engine 
trouble due to insufficient oil.

For details on checking engine oil 
level, please refer to “Check Engine Oil 
Level” in Section 7-2.

使用手册小330.indd   128

2011-4-13   18:36:51

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Suzuki SX4 SEDAN 2008 Owner'S Manual preview
SX4 SEDAN 2008
Brand: Suzuki Pages: 16
J-Top COMPACT Instructions preview
COMPACT
Brand: J-Top Pages: 2
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Honda 2004 S2000 Owner'S Manual preview
2004 S2000
Brand: Honda Pages: 208
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
OHIOSTEEL 1084TR Quick Start Manual preview
1084TR
Brand: OHIOSTEEL Pages: 2

Brands by name

Popular brands

Load more brands