manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 81 -

F3DM Owner’s Manual

(i) SRS Indicator
This indicator will come on when the 
“IG-ON” mode is enabled. After about 
5 seconds, the indicator will go off.  
This means the system of the airbag is 
operating properly.
This indicator system is intended to 
monitor airbag ECU, crash sensor, air 
charging device, warning indicator, 
interconnecting wiring and power 
sources..
If either of the following conditions 
occurs ,this indicates a malfunction 
somewhere in the parts monitored by 
the indicator system.  Please contact 
BYD authorized dealer as soon as 
possible to service the vehicle: 
●  The  indicator  does  not  come  on 
when the “IG-ON” mode is enabled or 
remains on. 
● The indicator comes on while driving. 

(j) High Coolant Temperature Indicator 
The indicator operates to warn that 
engine and electric motor are almost 
overheating. Park the car immediately 
to cool down the engine or electric 
motor. 
The engine or electric motor may get 
overheated in the following cases: 
Driving up a long hill on a hot day; 
lack of or leakage of the coolant fluid.
When the car is through the stop-and-
go pattern in driving, the AC device 
is on together with the engine idle 
running for a long time.
When the car is used to tow a trailer

(k) Hybrid System Warning Indicator  
This indicator will come on when 
the  “IG-ON”  mode  is  enabled.  If 
the Dual Model system is working 
normally, the indicator will go off after 
several seconds. Later if the system 

malfunctions, this indicator comes on 
again. 
If any of the following cases occurs, 
this indicates a malfunction somewhere 
in the parts monitored by the indicator 
system and please contact BYD 
authorized dealer as soon as possible. 
The indicator does not come on 
when the “IG-ON” mode is enabled or 
remains on. 
The indicator comes on while driving.

NOTICE

Do not drive the vehicle with the 
indicator on—even for one block. It 
may ruin the power system. 

使用手册小330.indd   81

2011-4-13   18:36:46

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
Fab Fours BLACK STEEL S2560 Installation Instructions Manual preview
BLACK STEEL S2560
Brand: Fab Fours Pages: 9
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Brand: Webasto Pages: 34
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
Oldsmobile 2004 Alero Quick Manual preview
2004 Alero
Brand: Oldsmobile Pages: 2
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
Dometic LMC Eriba Nova Service Manual preview
LMC Eriba Nova
Brand: Dometic Pages: 24
Ford F-250 Super Duty 2022 Owner'S Manual preview
F-250 Super Duty 2022
Brand: Ford Pages: 740
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20

Brands by name

Popular brands

Load more brands