manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 163 -

F3DM Owner’s Manual

the body and parts. Please wash your 
vehicle as soon as possible. 

 

y

When driving in the coastal areas

 

y

When driving on a road sprinkled 

with antifreeze.

 

y

When having coal tar, tree sap, bird 

droppings and insects

 

y

When driving in the areas with a lot 

of smoke, soot, dust, iron dust and 
chemical substances.

 

y

When the vehicle becomes 

remarkably dirty with dust and mud.

Warning

Do not splash water on the 
electric components in the engine 
compartment in case that the 
malfunction of electric components 
occurs.

Hand-washing your BYD F3DM
Work in the shade and wait until the 
car body is not hot to touch.

Notice

Please be careful not to injure your 
hands when cleaning under floor or 
chassis.

1. Rinse off loose dirt with a hose. 
Remove any mud or road salt in the 
underside of your car or in the wheel 
wells. 
2. Wash with a mild car-wash soap and 
mixed detergent should accord with 
the manufacturer’s instructions. Use a 
soft cloth dripping the cleaner and wipe 
your car gently. Do not use excessive 
force and let soap and clean water 
remove the dirt.

3. Rinse thoroughly. Dried soap may 
cause streaking. You may need to 
rinse each section right after you wash 
it.
4. To avoid water streak, please dry the 
body with dried soft cotton towel. Do 
not rub or press hard, or the paint may 
be damaged.
Plastic wheel ornaments
The plastic wheel ornaments may be 
damaged by organic substances. If any 
organic substances spill on ornaments, 
please wash it off with clean water and 
check whether the ornaments are hurt.

Warning

Do not install damaged plastic wheel 
ornaments, or they may drop off the 
wheel while driving and cause an 
accident.

!

!

使用手册小330.indd   163

2011-4-13   18:36:53

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
Saab 92X Owner'S Manual preview
92X
Brand: Saab Pages: 445
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
Caltrend LY115 Installation Instructions preview
LY115
Brand: Caltrend Pages: 3
Racelogic Speed & Route Profiler Manual preview
Speed & Route Profiler
Brand: Racelogic Pages: 24
Yakima K896 Instructions Manual preview
K896
Brand: Yakima Pages: 12
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7

Brands by name

Popular brands

Load more brands