manualshive.com logo in svg

BYD F3DM, Owner'S Manual

The BYD F3DM Owner's Manual is a comprehensive guide that provides detailed instructions and helpful information for owners of the BYD F3DM hybrid car. This all-inclusive manual is available for free download, exclusively from our website, ensuring that users have access to valuable insights and assistance whenever needed.

Share
Download
background image

- 157 -

F3DM Owner’s Manual

WARNING

Take extremely attention when 
towing the car. Avoid sudden starts 
or unstable operation which would 
effect great stress on the emergency 
towing hook and towing cable or 
chain. It may cause the hook and 
towing cable or chain break and 
cause serious injury or damage.

Emergency Maintenance 

Switch 

Functions of emergency maintenance 
switch 
In vehicle maintenance and 
emergency, cut off all high-voltage 
system in the unit. 
Emergency  maintenance  switch  is 
under the guard board of luggage 
carrier. Press the button on the 

handle when using and then pull it out 
horizontally.

E m e r g e n c y 
maintenance 
switch

WARNING

 

y

When the ignition key is at “ON”, 

strictly prohibit from plugging/ 
unplugging the emergency 
maintenance switch and 
connectors on the box. 

 

y

Before repair/dismantle the whole 

unit, do pull out the emergency 
maintenance switch first.

 

y

Do not pull out the emergency 

m a i n t e n a n c e   s w i t c h   a n d 
connectors on the box when the 
car is being charged

!

!

使用手册小330.indd   157

2011-4-13   18:36:53

Summary of Contents for F3DM























































































































































































































Reviews:

No comments

Related manuals for F3DM

Hama Cup holder Operating Instruction preview
Cup holder
Brand: Hama Pages: 2
Abarth 124 SPIDER Service And Warranty Handbook preview
124 SPIDER
Brand: Abarth Pages: 36
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Ecco Vantage 12 Series Installation And Operation Instructions preview
Vantage 12 Series
Brand: Ecco Pages: 5
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
Honda 08B15-SDN-100 Installation Instructions Manual preview
08B15-SDN-100
Brand: Honda Pages: 22
Mercedes-Benz 2013 CL Operator'S Manual preview
2013 CL
Brand: Mercedes-Benz Pages: 494
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
Front Runner LATF002 Quick Start Manual preview
LATF002
Brand: Front Runner Pages: 7
Ultraplast MD19 User Manual preview
MD19
Brand: Ultraplast Pages: 5
Toyota 2009 Tacoma Quick Reference Manual preview
2009 Tacoma
Brand: Toyota Pages: 22
AutoMaxi SUPRA 44 Montage preview
SUPRA 44
Brand: AutoMaxi Pages: 2
iDataLink ADS-BLADE AL Install Manual preview
ADS-BLADE AL
Brand: iDataLink Pages: 11

Brands by name

Popular brands

Load more brands