Commissioning of the KNX function via BJE DCA SmartTouch 10 (from
ETS5)
Product manual 2CKA001473B5342
│
84
■
Display brightness [%]
Options:
10 - 100
The parameter is used to set the display brightness in %.
Notice
The parameter is only available if the "Brightness is adjusted to the ambient
light" parameter is deactivated.
■
Switch off the display after [min]
Options:
1
2
5
10
15
30
The parameter is used to set after how many minutes the display is switched off.
■
Switch off the display when the room is dark
Options:
Activated
Deactivated
When the checkbox is activated, the display is switched off when the room is dark.
■
Brightness value for interpretation as dark
Options:
1 - 5
The parameter is used to specify the brightness value below which the brightness is interpreted
as dark (1 = dark - 5 = bright).
Notice
The parameter is only available if the parameter "Switch off the display when the
room is dark" is activated.
■
Switch off after [min] of darkness
Options:
1
2
5
10
The parameter is used to specify after how many minutes of darkness the display switches itself
off.
