Commissioning via Busch-free@home®
Product manual 2CKA001473B5342
│
48
8 Commissioning
via
Busch-free@home
®
Commissioning of the device is always carried out via the web-based surface of the System
Access Point. It is assumed that the basic commissioning steps of the overall system have
already been carried out. Knowledge about the web-based commissioning software of the
System Access Point is assumed.
The System Access Point establishes the connection between the free@home participants and
the smartphone, tablet or PC. The System Access Point is used to identify and program the
participants during commissioning. The link of the Busch-SmartTouch
®
with the System Access
Point is made during the course of initial commissioning (see chapter 7 “Initial commissioning of
device“ on page 43).
The devices can be parameterised for the use of additional functions.
Notice
The configuration is taken over fully automatic when the device is taken into
operation via Busch-Welcome
®
IP in combination with Busch-free@home
®
.
Notice
General information about commissioning and parameterization is available in
the Busch-free@home
®
system manual.
8.1
Allocation of devices and definition of channels
The devices connected to the system must be identified, i.e. they are allocated to a room
according to their function and are given a name.
The allocation is carried out via the Web-based user interface of the System Access Point.
