Brother P-touch 9400 User Manual Download Page 92

Page: 92 / 126

ERROR MESSAGE LIST

INCORRECT
OPERATION FOR
NUMBERING
FUNCTION

●

This message appears if charac-
ters in different lines or blocks are
selected as a numbering field
(NUMBER function on the
OPTION menu).

●

This message appears if a barcode
is selected together with other
characters as a numbering field
(NUMBER function on the
OPTION menu).

●

This message appears if more than
five characters are selected as the
numbering field (NUMBER func-
tion on the OPTION menu).

●

Adjust the numbering field
so that it only contains
characters within a single
line of a single block.

●

Select either the barcode
or the characters alone as
the numbering field.

●

Limit the numbering field
to five characters.

INSERT CASSETTE

●

This message appears if no tape
cassette is installed when you try
to print text.

●

Install a tape cassette and
try again.

INTERFACE MODE
INTERFACE ERROR

●

This message appears if an error
occurs while receiving data.

●

This message appears if the size of
the data being sent is larger than
the width of the installed tape cas-
sette.

●

Cancel the print job, and
then try printing again.

●

Cancel the print job, install
the correct tape cassette,
and then try printing again.

INTERFACE MODE
TAPE CASSETTE
CHANGED

●

This message appears if the tape
cassette is changed between the
moment that the data begins to be
received until the moment that the
print command is received.

●

Cancel the print job, install
the correct tape cassette,
and then try printing again.

ERROR MESSAGE

CAUSE

SOLUTION

Summary of Contents for P-touch 9400































































































































Search results

Summary of Contents for P-touch 9400

Reviews:

Related manuals for P-touch 9400

Brands by name

Popular brands

Brother P-touch 9400, User Manual

Search results

Summary of Contents for P-touch 9400

Reviews:

Related manuals for P-touch 9400

Brands by name

Popular brands