Brother P-touch 9400 User Manual Download Page 19 | Manualshive

Page: 19 / 126

background image

10

Ch. 2 Getting Started

Getting Star

ted

For UK and Ireland

If in any doubt, consult a qualified electrician.

IMPORTANT - Wiring Information

If the power cord supplied with this product is not suitable for your electrical outlet,
remove the plug from the mains cord and fit an appropriate three pin plug. If the replace-
ment plug is intended to take a fuse, then fit the same fuse as the original.

If a moulded plug is severed from the power cord, then it should be destroyed because a
plug with cut wires is dangerous if plugged into a live socket outlet. Do not leave it where
a child might find it.

In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362 with the
same rating as the original fuse.

Always replace the fuse cover. Never use a plug with the cover omitted.

WARNING - THIS PRODUCT MUST BE PROPERLY EARTHED.

This wires in the mains cord are coloured in accordance with the following code:

Green and yellow:

Ground

Blue:

Neutral

Brown:

Live

The colours of the wiring in the power lead of this product may not correspond with the
markings which identify the terminals in your plug. If you need to fit a different plug, pro-
ceed as follows.

Remove a length of the cord’s outer sheath, taking care not to damage the coloured insula-
tion of the wires inside.

Cut each of the three wires to the appropriate length. If the construction of the plug per-
mits, leave the green and yellow wire longer than the others so that, in the event that the
cord is pulled out of the plug, the green and yellow wire will be the last to disconnect.

Remove a short section of the coloured insulation to expose the wires.

The wire coloured green and yellow must be connected to the terminal in the plug marked
with the letter “E” or by the earth symbol, or coloured green or green and yellow.

The wire coloured blue must be connected to the terminal marked with the letter “N” or
coloured black or blue.

The wire coloured brown must be connected to the terminal marked with the letter “L” or
coloured red or brown.

The outer sheath of the cord must be secured inside the plug. The coloured wires should
not hang out of the plug.

«
...
17
18
19
20
21
...
»

Summary of Contents for P-touch 9400































































































































Reviews:

No comments

Related manuals for P-touch 9400

Brand: N&W Global Vending Pages: 72

Brand: Clatronic Pages: 60

Bar Italia ESP2

Brand: Breville Pages: 8

CLASSE 11 Series

Brand: Rancilio Pages: 28

Brand: Nescafe Pages: 16

Brand: Gaggia Pages: 78

Elektronika Profi Due

Brand: ECM Pages: 61

Brand: Xiamen Hanin Electronic Technology Pages: 104

Brand: Hamilton Beach Pages: 26

Brand: Dash Pages: 19

Brand: Clatronic Pages: 39

Brand: Ice-Tech Pages: 22

Brand: Arzum Pages: 76

Brand: Quality Espresso Pages: 47

Micro Cube M 120

Brand: Wessamat Pages: 58

Brand: Gastro-M Pages: 64

Brand: Saeco Pages: 8

Brand: Saeco Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands