12
Ch. 2 Getting Started
Getting Star
ted
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Connecting to the computer
This machine is equipped with an interface con-
nector, which allows you to print labels and
stamps that you create with the P-touch Editor
software installed on your IBM PC-compatible
computer and Macintosh.
1
Turn off both the P-touch and the computer.
2
Insert the small plug on the interface cable
into the interface connector on the back of
the P-touch.
3
Insert the 9-pin connector into the serial
(COM) port of your computer and tighten
the screws to lock it into place.
4
Turn on the P-touch, and then start up the
computer.
5
Press
on the P-touch to enter Interface
mode
.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Turning on & off the P-touch
The power supply key (
) is located in the
top right corner of the machine’s keyboard.
This P-touch will automatically turn off if no key
is pressed or no operation is performed for 30
minutes. In addition, if it has remained plugged
in, the previous session’s text is displayed when
you turn it on again.
●
Press
to turn on or turn off the P-touch.
NOTE
Only the US English version of the P-touch Editor
software for the Mac is available.
NOTE
Only use the interface cable designed exclusively
for this machine.
I / F
Summary of Contents for P-touch 9400
