Brady GLOBALMARK, User Manual

Page: 65 / 286

4-8
Working in the Editor window
label displayed is shown: for instance, Label 1 of 3, Label 2 of 3, and so
on.
Editing procedures
Selecting in the Editor window
Before you can use many of the tools and features shown on the Editor
window to format a label, you must select the part of the label shown in
the preview area of the Editor window that you want to work on.
When you select an object, small squares or selection markers appear
at the corners and midpoints of the sides of a dotted-line box around the
object. The dotted lines disappear, but the markers always indicate that
you have successfully selected the object, as shown here:
Figure 4-3. The Editor window with a graphic selected.
For instance, if you want to enlarge the coffee cup graphic in the
label in Figure 4-3, you first select the graphic on the label using one
of the methods described below, then choose the
Increase Size tool.
You can use either of the methods below to select an object in the
Preview area on the
Editor window, depending on your preference and
the equipment your system offers:
z
Touch the object you want to select. Selection markers appear
around the object, indicating that it is selected.
Selected
object
Selection
markers
Increase
Size tool