BouMatic Robotics MR-D1, Service Manual

Page: 326 / 446

Maintenance
Service: Continuation 1
Page 24-14 Version 1.7 23 June 2015
Steps To replace the tooth belts milking cups front and
rear, follow the steps in
Scheme 24-4 .
STEP ACTION
1. Follow step 2 until 8 to replace the tooth belts milking cups front.
2. Pull the tooth belt milking cup front voor (1) (see Figure 24-21 ) until
the clamping block (2) appears at the lower side of the shaft (2).
Figure 24-21 Clamping block milking cup front
3. Unscrew both bolts (3) of the clamping block.
4. Repeat step 2 en 3 for the tooth belt (5) (see Figure 24-21 ) of the
other milking cup front.
5. Unscrew the bolts of the clamping blocks (1) (see Figure 24-22 ).
2
3
1
4