BouMatic Robotics MR-D1, Service Manual

Page: 328 / 446

Maintenance
Service: Continuation 1
Page 24-16 Version 1.7 23 June 2015
STEP ACTION
Figure 24-24 Clamping blocks upperside milking box
11. Unscrew the bolts of the clamping blocks (1) (see Figure 24-25 ) above
the milk hoses.
Figure 24-25 Clamping blocks upper side milking box
12. Tighten the new tooth belts at the clamping blocks (1) (see Figure
24-25 ).
13. Place these around the pulley (2) (see Figure 24-25 ).
14. Tighten the tooth belt at the clamping blocks (1) (see Figure 24-24 )
that are located at the upper side of the milking box.
Scheme 24-4 Replacing tooth belts milking cups
1
2
1