BouMatic Robotics MR-D1, Service Manual

Page: 287 / 446

Maintenance
Service: Continuation 3 and 7
23 June 2015 Version 1.7 Page 21-17
STEP ACTION
Figure 21-23 Loose parts
7. Replace part (1) (see Figure 21-23 ) and part (3) by the corresponding
parts in the revision set.
8. Slide the bolt (2) (see Figure 21-23 ) through the upper side of the new
membrane (1).
NOTE : the upper side contains the groove (6).
9. Slide the bolt through the opening at the other side (see Figure 21-21 ).
10. Assemble the new ring (3).
11. Place the metal ring (4).
12. Tighten the nut (5) at the bolt.
13. Remove the bleu tabs (1) (see Figure 21-24 ) at the upper side of the
milk meter.
14. Unscrew the blue screw cap (2) (see Figure 21-24 ) at the upper side.
Figure 21-24 Blue screw cap upper side
Figure 21-25 displays the parts to be replaced at the upper side.
2
1
3
3
1
2
4 5
6