BouMatic Robotics MR-D1, Service Manual

Page: 87 / 446

Operations from BRI
Setting system
23 June 2015 Version 1.7 Page 8-13
8.6. Adjusting interval cleaning settings
Steps To adust the interval cleaning settings, follow the
steps in
Scheme 8-6 .
STEP ACTION
1. Open the
SETTINGS
tab of the
SERVICE
window.
2. Press the
INTERVAL
button.
The
INTERVAL CLEANING
settings (see Figure 8-7 ) will be displayed.
Figure 8-7 Interval cleaning settings
3. Select the desired milk box (1).
4. Refer to Table 8-6 for a description of the
INTERVAL CLEANING
settings.
Scheme 8-6 Adjusting interval cleaning settings
Table 8-6 Interval cleaning settings
COMPONENT DESCRIPTION
Interval clean delay Pumps off the milk in the receiver jar and starts
an intermediate cleaning after the specified time.
This is done when it takes too long for the next
cow to enter the cow box.
Clean floor length Specifies the time the water valve is open to
clean de box floor in the cow box (not yet
functioning).
1