BouMatic Robotics MR-D1, Service Manual

Page: 111 / 446

Operations from BRI
Operating milking box parts manually
23 June 2015 Version 1.7 Page 9-9
9.5. Starting pulsator test
Description To check the working of the pulsators, you can
perform a pulsator test.
Steps To perform a pulsator test, follow the steps in
Scheme 9-5 .
STEP ACTION
1. Open the
COMMANDS
tab of the
SERVICE
window.
2. Press the
PULSATOR TEST
button.
The
PULSATOR TEST
buttons (see Figure 9-6 ) will be displayed.
Figure 9-6 Pulsator test commands
3. Select the desired milk box (1).
4. Refer to Table 9-5 for a description of the
PULSATOR TEST
buttons.
Scheme 9-5 Starten des Pulsatortests
Table 9-5 Pulsator test commands
COMPONENT DESCRIPTION
LEFT FRONT
button Starts the pulsation of the left front teat.
RIGHT FRONT
button Starts the pulsation of the right front teat.
LEFT REAR
button Starts the pulsation of the left rear teat.
RIGHT REAR
button Starts the pulsation of the right rear teat.
1