BouMatic Robotics MR-D1, Service Manual

Page: 243 / 446

Maintenance
Service: Commissioning, 1, 2, 3, 4, 5, 6, 7 and 8
23 June 2015 Version 1.7 Page 19-19
STEP ACTION
Figure 19-27 Disassembling stamper
4. Position a socket wrench at the flat side (3) (see Figure 19-27 ) and
unscrew the stamper with an allogator wrench.
5. Disassemble all parts and put them in order of disassembling (see
Figure 19-28 ).
Figure 19-28 Separate parts
6. Replace the stamper (1) (see Figure 19-28 ) and the valve (2).
7. Put loctite 243 (4) (see Figure 19-28 ) at the screw threads of the
stamper and part (3).
8. Reassemble all parts of the valve.
9. Tighten the entire valve with the socket head screws that you
unscrewed in step
2 .
10. Fix the valve with the clamp.
Be sure that the leackage hole (1) (see Figure 19-29 ) in the
housing is directed downwards!
1
2
3
2
1
4 4
3