56
Q-TECH™ ProgrammEr: oPEraTIon
The gain setting adjusts the sensed S-ECG signal sensitivity. It may be manually selected via the
Select Gain slider switch (Figure 46).
Figure 46:
Gain adjustment
•
1x Gain (± 4 mV):
1x Gain should be selected when the signal amplitude is large
enough to cause clipping when the 2x gain is selected.
•
2x Gain (± 2 mV):
2x Gain should be selected when the signal amplitude is small
enough to allow use of a more sensitive setting without causing
clipping of the captured signal. The 2x gain selection amplifies
the signal twice as much as the 1x gain selection.
Summary of Contents for Q-Tech 3200
Page 1: ...Q TECH PROGRAMMER A COMPONENT OF THE S ICD SYSTEM USER S MANUAL 3200 ...
Page 6: ......
Page 81: ......
