17
Q-TECH™ ProgrammEr: oPEraTIon
date and Time Format
To set the date and time format:
1.
Select Set Date and Time Format on the Programmer Settings screen (Figure 6).
The Date and Time Settings screen appears (Figure 7).
2.
Select the desired date format.
3.
Select the Save button to save the changes and return to the Programmer Settings screen,
or select Cancel to return to the Programmer Settings screen without saving the changes.
Figure 7:
Date and Time Settings screen
Time Zone
To set the time zone in which the programmer will be used:
1.
Select Set Time Zone on the Programmer Settings screen. The time zone selec-
tion screen appears (Figure 8).
2.
Select the country/time zone button for the zone in which the programmer will
be used. A checkmark will appear in the selected button. The SQ-RX device line
frequency of 50 Hz or 60 Hz is automatically programmed based on the country/time
zone selected.
Summary of Contents for Q-Tech 3200
Page 1: ...Q TECH PROGRAMMER A COMPONENT OF THE S ICD SYSTEM USER S MANUAL 3200 ...
Page 6: ......
Page 81: ......
