Appendix H - Web User Management
User Guide
413
Step 3: Configure the new access limit.
Type the URL (or the subdirectory), and select the access privilege. If authentication
is required to access the page, select COOKIE ACCESS; otherwise, select FULL
ACCESS. If this page is confidential, check the Secure box.
Step 4: Click on the Submit button.
A confirmation message will appear.
Step 5: If there are more access limits to be added, repeat the steps 1 to 4.
Step 6: Click on the link Web User Management > Load/Save Web Configuration.
Step 7: Click on the Save Configuration button.
This will save the users added in the file /etc/websum.conf.
Step 8: Click on the link Administration > Load/Save Configuration.
Step 9: Click on the Save to Flash button.
Deleting an access limit
Step 1: Click on the link Web User Management > Access Limits.
Step 2: Select the access limit to be deleted and click on the Delete Access Limit button.
A confirmation message will appear.
Step 3: If there are more access limits to be deleted, repeat the steps 1 and 2.
Step 4: Click on the link Web User Management > Load/Save Web Configuration.
Step 5: Click on the Save Configuration button.
This will save the users added in the file /etc/websum.conf
Step 6: Click on the link Administration > Load/Save Configuration.
Step 7: Click on the Save to Flash button.
