Appendix C - The pslave Configuration File
User Guide
313
all.dcd
DCD signal (sets the tty parameter
CLOCAL). Valid values are 0 or 1. If
all.dcd=0, a connection request will be
accepted regardless of the DCD signal and
the connection will not be closed if the
DCD signal is set to DOWN. If all.dcd=1 a
connection request will be accepted only if
the DCD signal is UP and the connection
will be closed if the DCD signal is set to
DOWN.
0
all.users
Restricts access to ports by user name (only
the users listed can access the port or, using
the character “!”, all but the users listed can
access the port.) In this example, the users
joe, mark and members of
user_group cannot access the port. A single
comma and spaces/tabs may be used
between names. A comma may not appear
between the “!” and the first user name. The
users may be local, Radius or
TacacsPlus. User groups (defined with the
parameter conf.group) can be used in
combination with user names in the
parameter list. Notice that these are
common users, not administrators.
! joe, mark,
user_group
Table 26: Parameters Common to CAS, TS, & Dial-in Access
Parameter
Description
Value for this
Example
