Chapter 3 - Additional Features
User Guide
277
Screen 7:
***********************************************************
********* C O N F I G U R A T I O N
W I Z A R D *********
***********************************************************
You have 8 available ports on this system.
Type 'q' to quit, a valid port number[1-8], or anything
else to refresh :
Screen 8:
***********************************************************
********* C O N F I G U R A T I O N W I Z A R D *********
***********************************************************
(Note: If you are NOT connected to this unit through a
console, and you have just reconfigured the IP of this
unit, activating the new configurations may cause you to
lose connection. In that case, please reconnect to the
unit by the new IP address, and manually issue a saveconf
to save your configurations to flash.)
Do you want to activate your configurations now? (y/n) [y] :
Screen 9:
***********************************************************
********* C O N F I G U R A T I O N
W I Z A R D *********
***********************************************************
Flash refers to a type of memory that can be erased and
reprogrammed in units of memory known as blocks rather than
one byte at a time; thus, making updating to memory easier.
If you choose to save to flash, your configurations thus
