Chapter 3 - Additional Features
User Guide
153
Step 2: Log in as root and type the Web root password configured by the Web server.
This will take you to the Configuration and Administration page.
Step 3: Click the General link on the Link Panel.
This takes you to the General page.
Step 4: Scroll down to the Ethernet port section.
You can choose the DHCP Client option in this section. Select the
radio button and
click the Submit button at the bottom of the page.
Figure 21: DHCP client section
Step 5: Make the changes effective.
Click on the Administration > Run Configuration link, check the Serial Ports/Ether-
net/Static Routes box and click on the Activate Configuration button.
Step 6: Click on the link Administration > Load/Save Configuration.
Step 7: Click the Save Configuration to Flash button.
The configuration will be saved in flash.
