Chapter 3 - Additional Features
User Guide
147
If you type 'n'
Type 'c' to go back and CORRECT these parameters or 'q' to
QUIT :
Typing 'c' repeats the application, typing 'q' exits the entire wiz application
If you type 'y'
Discard previous port-specific parameters? (y/n) [n] :
Type 'c' to CONTINUE to set these parameters for specific
ports or 'q' to QUIT :
Typing 'c' leads to Screen 8, typing 'q' leads to Screen 9.
Screen 8:
***********************************************************
********* C O N F I G U R A T I O N
W I Z A R D *********
***********************************************************
You have 8 available ports on this system.
Type 'q' to quit, a valid port number[1-8], or anything
else to refresh :
Note:
Answering yes to this question will discard only the parameter(s) which
you are currently configuring if they were configured for a specific port in a
previous session. For instance, if you are currently configuring parameter, all.x,
and there was a specific port, s2.x, configured; then, answering yes to this
question will discard s2.x.
