Chapter 3 - Additional Features
User Guide
221
Step 3: Select the Serial Ports link.
Click on the Serial Ports link on the Link Panel to the left of the page or in the
Configuration section of the page. This will take you to the Port Selection page.
Step 4: Select port(s).
On the Port Selection page, choose all ports or an individual port to configure, from
the dropdown menu. Click the Submit button. This will take you to the Serial Port
Configuration page.
Step 5: Click the “CAS Profile ” button.
Step 6: Scroll down to the Physical section.
You can change the settings for Speed, Data Size, Stop Bit, Parity, Flow Control, and
DCD-sensitivity here.
Step 7: Click on the Submit button.
Step 8: Make the changes effective.
Click on the Administration > Run Configuration link, check the Serial Ports/
Ethernet/Static Routes box and click on the Activate Configuration button.
Step 9: Click on the link Administration > Load/Save Configuration.
Step 10: Click the Save Configuration to Flash button.
The configuration was saved in flash.
Wizard Method
Step 1: Bring up the wizard.
At the command prompt, type the following to bring up the CAS Terminal Settings
custom wizard:
wiz --sset cas
Screen 1 will appear.
