Black Box LGB6026A, Management Manual

Page: 1113 / 1289

– 1111 –
C
HAPTER
47 | IP Routing Commands
Global Routing Configuration
◆
Static routes are included in RIP and OSPF updates periodically sent by
the router if this feature is enabled by the RIP or OSPF
redistribute
command (see page 1124 or page 1145 , respectively).
E
XAMPLE
This example forwards all traffic for subnet 192.168.1.0 to the gateway
router 192.168.5.254, using the default metric of 1.
Console(config)#ip route 192.168.1.0 255.255.255.0 192.168.5.254
Console(config)#
maximum-paths
This command sets the maximum number of paths allowed. Use the no
form to restore the default settings.
S
YNTAX
maximum-paths path-count
no maximum-paths
path-count - The maximum number of equal-cost paths to the same
destination that can be installed in the routing table. (Range: 1-8)
D
EFAULT
S
ETTING
Enabled, 4 paths
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
switch(config)#maximum-paths 8
switch(config)#
show ip route
This command displays information in the Forwarding Information Base
(FIB).
S
YNTAX
show ip route [ connected | ospf | rip | static | summary ]
connected – Displays all currently connected entries.
ospf – Displays external routes imported from the Open Shortest
Path First (OSPF) protocol into this routing domain.
rip – Displays all entries learned through the Routing Information
Protocol (RIP).
static – Displays all static entries.